PigeonBotella alta de paja

Detalles de Producto

• Suitable for more than 9 months
• * Soft body tube design, large capacity, and a convenient straw to replace.
• * Water cup heat resistance temperature: 120 degrees
• * Can not be autoclaved
• The cup of this straw cup is PP material, the straw is silicone, non-toxic, does not contain bisphenol A, and has a natural smell.
• Material: bottle body, handle, straw switch, cap - polypropylene
• Straw, ventilation parts - anthrone rubber
• Disinfection method: boiling, microwave oven, liquid medicine
• Boiling disinfection points:
• 1. The disinfection time is 3~5 minutes after the hot water boils.
• 2. Although the water temperature is 100 C, the temperature of the pot bottom will be higher than the water temperature, and the contact of the plastic products will cause deformation.
• 3. Do not leave the pot during boiling disinfection.
• 4, the temperature of the water heated by the general household induction cooker is 100 degrees, but if the temperature of the water boiled by the pressure c
• ooker may exceed 120 degrees, please do not use the hot water boiled in the pressure cooker to disinfect the cup. Or inject into the cup to avoid deformation of the cup.
• 5. Do not close the lid after injecting boiling water. Otherwise, after the water becomes cold, the principle of thermal expansion and contraction will cause the cup to be inward and cause deformation.